Introduction: The measurement principle of the split type electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. The split type electromagnetic flowmeter consists of a sensor and a converter. The sensor is installed on the measurement pipeline, and the converter is installed within 30 meters or 100 meters from the sensor. The two are connected by a shielded cable. The main components of the split type electromagnetic flowmeter sensor are: measuring tube, electrode, excitation coil, iron core, and magnetic yoke housing. Mainly used to measure the volumetric flow rate of conductive liquids and slurries in closed pipelines. Such as water, sewage, mud, pulp, various acids, alkalis, salt solutions, food slurries, etc., are widely used in industries such as petroleum, chemical, metallurgical, textile, food, pharmaceutical, papermaking, as well as environmental protection, municipal management, water conservancy construction, etc. to measure high temperature, high humidity, and difficult to observe environments. Principle: The measurement principle of the split electromagnetic flowmeter is based on Faraday's law of electromagnetic induction. The split electromagnetic flowmeter consists of a sensor and a converter. The sensor is installed on the measuring pipeline, and the converter is installed within 30 meters or 100 meters of the sensor. The two are connected by a shielded cable. The main components of the split type electromagnetic flowmeter sensor are: measuring tube, electrode, excitation coil, iron core, and magnetic yoke housing. Mainly used to measure the volumetric flow rate of conductive liquids and slurries in closed pipelines. Such as water, sewage, mud, pulp, various acids, alkalis, salt solutions, food slurries, etc., are widely used in industries such as petroleum, chemical, metallurgical, textile, food, pharmaceutical, papermaking, as well as environmental protection, municipal management, water conservancy construction, etc. to measure high temperature and high humidity environments that are difficult to observe. Characteristics: 1. Measurement is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity; 2. There are no obstructing flow components or pressure loss inside the measuring tube, and the requirements for straight pipe sections are relatively low; 3. Series nominal diameter DN15~DN3000. There are multiple options for sensor lining and electrode materials; 4. The converter adopts a novel excitation method, with low power consumption, stable zero point, and high accuracy. The flow range can reach 1500:1; 5. The converter can be integrated or separated from the sensor; 6. The converter adopts a 16 bit high-performance microprocessor, 2x16 LCD display, convenient parameter setting, and reliable programming; 7. The flowmeter is a bidirectional measurement system equipped with three integrators: forward total, reverse total, and differential total; Can display. Zhuang, reverse flow, and have multiple outputs: electric Flow, pulse, digital communication HART； 8. The converter adopts surface mount technology (SMT) and has self checking and self diagnostic functions.